Skip to content
Cart
← The DSC Journal

How to lay out van graphics around wheel arches

Keep van lettering and design details clear of wheel openings by proofing the exact body style and viewing the artwork from an angle.

Vehicle graphics
Davao Sticker Custom

Draw the arch on the actual van photo

Photograph the side of the parked van with the camera facing the wheel opening squarely. Note whether a trim flare or mudguard changes where the painted area ends. Ask the designer to draw the outside boundary of that trim on the proof. If you have vans with different wheelbases or body kits, give each group its own reference photo and dimensions.

Give the main message a clear path

Start by placing the business name above the arch or on a clear panel beside it. Leave a blank zone where the opening would cut through the design. If a background stripe runs near the wheel, ask to see both a version that stops short and one that continues as separate shapes. Follow each version with your eyes from the front door toward the rear.

Check the artwork from the rear corner

Hold a full-size paper proof of the closest lettering against the parked van. Step back and view the layout from the side, then from the rear corner. A word close to the arch can appear crowded as the side of the van recedes. Shift the letters farther from the opening if the first layout feels cramped from that second position.

Save the trim boundary with the approved proof

Record the artwork width and two measurements from fixed panel edges. Ask the installer to mark where film will end near the trim and agree on that boundary before print. Keep the photo and proof under the same body-style name. If trim is likely to change during repairs, note the measured clearance beside the piece number before filing the proof.

If the finished design needs several pieces of film, use the van wrap film seam guide to review where those pieces meet.

Request a project quote

Send square side photos and measurements around the wheel opening and trim.

Discuss your project →