Skip to content
Cart
← The DSC Journal

Testing sticker lift on a handled gift bag

Load the bag and check how the handles and folds pull on the sticker through carrying, storage, and handoff.

Handled gift bag sticker lift
Davao Sticker Custom

Compare the flat bag with the filled one

Open a bag and load it the way staff prepare a gift. Lift both handles and mark where the paper stretches or creases. Put a mockup on the intended face and see whether the sticker crosses a fold that changes under load. Try a second spot away from the handle attachment. Give the printer the bag material and both positions before requesting a sample.

Apply matching samples and carry the bags

Follow the material instructions and give both samples the same wait. Carry the bags and set them down in the usual position. Check the top corners first and note whether a raised edge follows a crease or finger grip. Try the normal packing stack and pull one bag out. If a sticker lifts only after the bag is loaded, photograph it before changing the placement or material.

Confirm the position with a second bag size

Apply a fresh sample in the preferred position and repeat the carry check. If smaller bags bend in a different place, give them a separate placement reference. Keep a filled bag photo and the approved sticker construction together. Let staff know whether to apply it before or after filling.

Keep an unused comparison piece

Set one labeled bag aside without carrying it so you can compare the edge after handling.

If bags are handed out in a stack, pull the center one out and check the label again. Record where the edge first caught or creased.

See the bag sticker adhesion guide for a related check.

Request a project quote

Send the bag stock and show where the sticker sits under load.

Discuss your project →