Skip to content
Cart
← The DSC Journal

Testing sticker adhesion on reusable totes

Compare sticker samples on the exact tote fabric or coating, then check the edges after folding, carrying, and storage.

Reusable bags
Davao Sticker Custom

Bring the tote you intend to use

Check the care tag and tell the printer whether the sticker will touch woven fabric, a laminated face, or a smooth patch. Send photos of the empty tote and of it holding a typical order. Mark where the handles pull on the front panel. If you use the same tote in several colors, confirm whether all versions have the same surface. A color swatch alone will give the printer little information about adhesion.

Compare two positions on the same bag

Ask for a sample suited to the surface and apply it according to the material directions. Try the intended spot and a second spot away from a fold or seam. Give both samples the same time before handling. Load the tote and lift it by the handles. Watch where the panel bends under the load, then check which sticker edges stay flat once you empty and fold the bag again.

Repeat the handling that matters to you

Follow the routine the bags will see, such as folding into a stack between events or wiping a coated tote after use. Record where a sample lifts and whether the bag surface changes when you remove it. Ask for another construction or change placement if neither spot passes your trial. Save a photo of the exact material and position you approve.

For a separate size and readability check, see the shopping bag logo sizing guide.

Request a project quote

Share the tote material, intended placement, and how often the bag will be reused.

Discuss your project →