Davao Sticker Custom
Photograph the ramp in its normal working position
Use a safe viewpoint to show the ramp, rear opening, and painted surfaces beside it. Mark where a load passes and where the ramp itself sits. Ask a crew member to describe the usual loading sequence and show what changes with a second type of load. Record any marks you want the installer to assess.
Separate the loading contact from the ramp hardware
Point out painted areas separately from grip surfaces, fasteners, and fittings. If the ramp touches paint where it should not, have its fit checked first. Ask the film installer to outline the painted contact zone and show where a small piece would end. Compare a wider option only if it covers another area you want protected.
Check the layout with the ramp fitted
Ask which surfaces the installer can assess for film and what must stay clear. Confirm whether the estimate includes any work around the ramp or trim. If the equipment changes between jobs, check the alternate setup before settling the line.
Review a second loading route if the vehicle has one
Show how the equipment passes when staff load from another angle. Mark that contact on the same photo, then ask whether it belongs in the first piece or a separate option. Give the crew the approved map before the van returns to work. Include the ramp position in the handoff photo.
Give the crew a photo of the finished boundary
Use the approved drawing to check the piece at pickup. Save the working and closed views so the crew can locate the same area if they see a new mark.
For a work vehicle’s painted loading surfaces, see the work vehicle rear bumper guide.