Davao Sticker Custom
Identify the panel beside the moving door
Photograph the rear door closed and open from the same position. Mark the fixed rear quarter next to the opening and the separate painted edge of the door. Check for marks near the rear corner of the opening and the top of the wheel arch. Take close photos that show where any scratches sit relative to the panel gap.
Watch where passengers pass the panel
With the car parked, ask someone to enter and exit from the rear seat as usual. Look at where bags, clothing hardware, or a child seat pass close to the quarter panel. Try the same check with the door open as far as it usually goes at home. Mark the areas of contact on the photo and label which side sees each type of use.
Ask for a piece that follows the contact area
Show the installer the marked zone and ask what the outline would look like. If the marks cross a gap or reach the wheel arch, have them show how they would split or end the pieces. Ask to see where any edge ends on the visible face. Keep passenger-side and driver-side options separate until you choose the scope.
Verify which panel you paid to cover
At pickup, open the door and use the drawing to check the fixed panel, the edge, and any adjacent piece you approved. Save a photo showing each boundary. If passengers use the opposite door in tight spaces, repeat the check there before ordering a matched pair of pieces.
For contact inside the opening, see the door cup and sill coverage guide.