Skip to content
Cart
← The DSC Journal

Where to put PPF on door cups and sills

Map hand and shoe contact on each door before choosing paint protection film for the handle recess and painted sill.

Vehicle protection
Davao Sticker Custom

Find the contact marks behind each handle

Look into the recess behind each exterior handle. Check the top and sides of the recess as well as the area your fingertips pass over when you pull the door open. Photograph existing marks with the handle in view. Ask whether the film outline can follow the contact area on your handle shape. If the doors have different handles or contours, show each one in the inquiry.

Separate the painted sill from nearby trim

Open each door and look for the spot shoes touch when people get in and out. Check the painted step, the raised lip at the outer edge, and any adjacent plastic or sill plate. Use a photo to outline the painted area you want assessed. If the scuffs land on both paint and trim, mark the two surfaces separately and ask the installer which can take the proposed film.

Account for how each door gets used

Start with doors that see the most traffic or where you see new marks. The rear door nearest a child seat may have a different contact pattern from the driver’s door. If you load items through a side door, show where boxes or bags slide across the step. Give each opening its own label, such as left rear, so the installer can quote the pieces you need.

Check the outline before work begins

Review the proposed coverage with the doors open. Ask where each film edge will stop relative to the handle recess, the painted lip, and any nearby sill plate or weather seal. Have the installer list the door cups and sills separately on the estimate. At pickup, compare the finished pieces with the photos you marked.

For other panel choices, see the paint protection film guide.

Request a project quote

Send one photo of each handle recess and painted sill you want assessed.

Discuss your project →