Skip to content
Cart
← The DSC Journal

How to proof a delivery van wrap around rear steps

Use the van’s loading view to place rear graphics where the steps and open doors do not hide them.

Vehicle graphics
Davao Sticker Custom

Document the usual rear setup

Take rear and corner photos with the doors closed and in their working positions. Include the steps, handles, and any fitted guards. Mark where a delivery worker stands and where a customer normally approaches. Show whether the step stays fixed or changes position.

Review the rear copy in both positions

Ask the designer for two proofs showing the step and doors. Check whether the name, number, or loading instruction remains visible when the van is in use. If the step hides a lower strip of artwork, compare moving that detail to a higher or fixed panel. Keep the exact wording in both versions.

Agree which surfaces belong in the quote

Ask the installer to draw the film ends around the step and neighboring hardware. Identify anything that must stay clear and whether the estimate assumes the step remains fitted. If access is still uncertain, keep that line pending.

Check how customers see the van from the curb

Ask someone to read the main detail while another person stands where the delivery crew normally works. If they block the copy, try moving it to another panel while keeping the wording the same. Ask for that revision on both rear views. Keep the film boundary and any step access notes beside the design approval. Save a photo that shows the exact working position at pickup. Label the finished view with the van identifier.

Use the loading view during handoff

Check the finished rear from the same viewpoints. Save the approved proof and a photo of the van set up for a normal delivery.

For a larger movable rear fitting, see the tail lift wrap graphics guide.

Request a project quote

Send rear loading photos and the copy you need customers to see.

Discuss your project →