Skip to content
Cart
← The DSC Journal

How to plan truck wrap graphics around a tail lift

Proof the rear message with the lift stowed and in its working position before choosing the artwork and film boundaries.

Vehicle graphics
Davao Sticker Custom

Show what the lift covers in each position

Take photos with the lift stowed and in the working position, using a safe viewpoint and normal operating procedure. Mark the fixed body, lift surface, nearby controls, and required markings. Include the side view of the truck if the rear is often blocked during service. Tell the designer which view customers are most likely to see.

Decide where the main message belongs

Ask for two rear proofs showing the lift positions. Check whether the name or contact number disappears when the lift is deployed. If the rear view changes a lot, keep the essential information on a fixed surface or a side panel. Check that a line or image still makes sense when the lift is stowed.

Confirm the film and equipment boundaries

Ask the installer to mark what stays clear and which surfaces can be assessed for wrap. Agree who will review access or operate the lift during installation. Keep the lift and body scopes separate if they require different work.

Check both views from a safe customer position

Ask a colleague to read the proposed rear message from the place a customer would stand at a delivery stop. If the lift or a loading area blocks the view, compare the same wording on a side panel. Ask the designer to show any change on the vehicle proof and note which surfaces stay exposed. Ask the crew which rear details must stay visible during loading.

Review both positions at pickup

Take matching photos showing the installed graphics and save them with the approved proof.

For planning graphics around equipment behind a cab, see the flatbed cab wrap design guide.

Request a project quote

Send photos of the tail lift stowed and in use, with the rear message and access areas marked.

Discuss your project →