Skip to content
Cart
← The DSC Journal

Choosing a logo position on a drawstring pouch

Check how the pouch gathers when closed and test the logo where it stays readable through filling and handoff.

Drawstring pouch logo placement
Davao Sticker Custom

Find the surface that stays flat after closing

Fill the pouch and pull the drawstring the way a recipient would. Mark the folds that form under the channel and where the cord rests. Put a paper mockup on the front below the gathered area. Try a second position if a seam or curve pushes the logo out of view. Tell the printer whether the adhesive will touch fabric, a coating, or a separate patch.

Check how the pouch is held at handoff

Lift the pouch by the cord and by the body. See where fingers cover the logo and whether the pouch rotates in storage. If the same design goes on two sizes, test the smaller pouch with its normal contents. Ask for a sample suited to the surface and apply it as directed. Compare the print and edges once the pouch is open and closed.

Give packers a reference below the drawstring

Mark a visible feature, such as the bottom edge or side seam, for placing the sticker. Ask a second person to apply one from the reference and check the result on a filled pouch. Save an approved sample and note when staff apply it. If the pouch gets reused, test the fold and handling routine before choosing the final placement.

If the pouches hang from a rack, check the logo while the cord carries the full weight. Turn the pouch so you see the side shoppers see first. Record where the label sits relative to that face.

See the reusable tote adhesion guide for a related check.

Request a project quote

Send the pouch material and show how it looks filled and cinched.

Discuss your project →