Davao Sticker Custom
Mark the area taken up by the rolled top
Fill the pouch to the expected level and roll it closed using the usual number of turns. Mark where the rolled section ends on the front and where a clasp or strap touches it. Repeat with a fuller pouch if the roll changes position. Place a full-size paper mockup on the area that stays visible. Check which words need to read before the pouch opens.
Compare the mockup during opening and refilling
Unroll the pouch and see whether the sticker would cross a fold or a place staff press to close it. Try a second position lower on the body if the first one bends. Ask for a sample suited to the material and apply it as directed. Roll and unroll the pouch several times. Check whether a printed line disappears or a corner lifts near the fold.
Approve the location with the pouch packed
Keep a photo showing the shortest and longest rolls you expect. Give the packer a visible edge below the roll to use for alignment. If several pouch sizes share a label, note which position fits each one. Save the finished sample and the artwork version.
Include the storage position in the trial
Put the pouch where it waits between uses and inspect the label again. If another bag rests against the rolled section, check whether it also touches the sticker.
If the pouch has a front and back print, compare the approved position from both sides after closing. Mark the side the packer should use when applying it flat.
See the pouch opening placement guide for a related check.