Skip to content
Cart
← The DSC Journal

Placing product labels near pouch seals

Check pouch labels against the sealed edge, tear notch, and zipper on filled packs so customers can open them as intended.

Pouch labels
Davao Sticker Custom

Mark the parts customers will use

Start with a filled pouch that has gone through your normal sealing process. Point out the top seal, any tear notches, and the zipper if the pouch has one. Trace where a customer will pull or tear to open it. Place a full-size paper mockup on the pouch face and see which part stays flat when it stands up. Check both a lightly filled pouch and your fullest one.

Leave room for the seal and the opening path

Check that the product label stays on the pouch body after opening if the customer needs to read it again. Give a tear notch and opening instructions their own space. If your plan calls for a separate closure sticker, show that on a second mockup so the printer can see the difference in purpose and placement. Tell your packer whether the main label goes on before or after sealing.

Open several finished samples

Apply printed samples and pack them as you would for sale. Give a sample to someone who has not seen the layout and watch where they grip and open the pouch. Check whether the label wrinkles near the seal or covers the zipper line when the pack folds. Mark a reference point that your staff can use for repeatable placement.

See the product label guide for measuring the usable panel and ordering separate versions.

Request a project quote

Show us the filled pouch and mark its seal, tear notch, and proposed label position.

Discuss your project →