Skip to content
Cart
← The DSC Journal

Checking a sticker near a pouch tear notch

Keep the notch and tear direction usable and test whether the label stays intact on the part of the pouch customers keep.

Pouch tear notch clearance
Davao Sticker Custom

Mark the path a customer tears

Fill and seal a pouch and point to the notch on each side. Tear a spare from the notch and show where the tear ends. Mark that path on a closed pouch. Measure the available area between the path and the label position. Use the package sizes you actually sell because a notch can sit lower on a smaller pouch. Keep any opening arrow visible on the mockup.

Try the closest proposed position at full size

Apply a printed sample near the notch. Have someone open the pouch without seeing the layout instructions first. Watch whether they can grip the edge and whether the sticker pulls as they tear. Read the information that needs to remain on the pouch after opening. If an important line sits on the part that tears away, move it to the body and test again.

Give staff a placement edge they can see

Mark the approved location relative to a visible feature other than the cut itself, such as the edge of the front panel. Apply a few samples from that reference and check the clearance on each. Keep an opened and unopened pouch with the proof.

If both sides of the pouch have a notch, open separate samples from each side. The tear can travel differently when a customer uses their other hand. Check the smallest distance to the label in both trials and adjust the position before packing the full run.

For a broader check around a seal or zipper, see the pouch seal placement guide.

Request a project quote

Send the filled pouch and mark the tear notch and the sticker's closest edge.

Discuss your project →