Skip to content
Cart
← The DSC Journal

Checking labels on sachets with two fold lines

Compare where the label sits on a filled sachet and check whether either fold hides the text or catches a sticker edge.

Two-fold sachet labels
Davao Sticker Custom

Mark both folds on the actual filled sachet

Open a sample and draw where each line bends after filling and closing. Note which fold stays visible and which one tucks away. Place a paper mockup between them and check the available width at the narrowest spot. If the sachet folds differently at its highest fill level, mark that view too. Show the printer which copy must stay visible after opening.

Compare the two edges with a printed sample

Apply a sample at the normal packing stage. Close both folds and inspect the edges where the film or paper bends. Put another sample farther from the tighter fold if you have space. Read the text from the position a shopper will see. Open the sachet and check whether a line of copy disappears with a flap. Note which fold caused the problem before moving or resizing the label.

Give staff a clear placement reference

Mark a visible edge they can follow while the sachet is flat. Try applying several samples and compare the finished position after folding. Save an intact and opened sachet with the artwork. If the same sticker goes on another sachet size, check the clearance around both folds again.

Check the sachet in its finished carton

Put several packed pieces in the carton and pull one out. Make sure the edge remains flat where the folds sit against neighboring sachets.

Ask a second packer to close the sample without the placement photo in view. Compare the result with the intended fold positions.

See the pouch seal placement guide for a related check.

Request a project quote

Send the filled sachet and mark both fold lines and the proposed label.

Discuss your project →