Davao Sticker Custom
Photograph the rear window and hatch together
Take a straight rear view and corner photos showing the trim around the glass. Include the wiper, handle, and hatch in its normal open and closed positions if practical. Mark the painted body areas you want wrapped. Tell the installer if a trim piece has been replaced or is still waiting to be fitted.
Keep the lettering on a usable surface
Ask for a proof with the actual window shape and trim visible. Check whether the trim interrupts a word or creates a narrow area beside the glass. If you need a second position, compare the same wording and letter size on the revised proof. Look from the normal approach to the car.
Check where the wrap ends at the trim
Ask the installer to mark the film boundary and note which surfaces stay exposed. Confirm who would handle any access if trim must move. If a change to the fitted part affects the outline, ask for an updated drawing before production.
Repeat the check with the hatch open
Ask whether the copy needs to remain visible during loading. If it does, show the working view and mark what changes before approving the artwork.
Save the final rear view
Compare it with the installed design at pickup and take a close photo of the trim stop. If the trim is glossy or a different color from the body, review the proof under the light where the rear is usually seen. Check whether a border stays visible from the corner. Mark the preferred stop on the proof before the shop prepares the film.
For a window positioned away from the center, see the offset rear window wrap guide.