Skip to content
Cart
← The DSC Journal

How to design a wrap for a landscape service pickup

Check the business name and contact details with the tools, trailer, or racks the pickup normally carries.

Vehicle graphics
Davao Sticker Custom

Photograph the pickup in its working setup

Take side and rear photos with the regular toolboxes, ladder racks, or trailer in place. Include an unloaded view if customers see that configuration too. Mark where equipment hides the bed or tailgate. Tell the designer which side is most visible while the crew works and where a customer normally approaches.

Choose copy that stays visible in both setups

Put the business name and one main service where the equipment leaves enough space. Keep the contact method on a surface that remains visible when the tailgate is open if that matters at jobs. Ask for proofs of the loaded and unloaded positions. Verify the number or website against what the business actually uses.

Review the lower edge with the installer

Ask where the wrap stops around steps, racks, or bed hardware. If one area needs a separate inspection, identify it on the quote. Have the installer show any part the graphic cannot use until the hardware is confirmed.

Give the trailer setup its own review if you use one

Check the contact detail from behind with the trailer fitted. If the trailer hides it, compare moving it to a side or cab panel. Ask the designer to show the revised version with your normal tool load. Share that view with the crew before approving the file. Ask the crew to check the number or website from the spot where customers usually approach.

Check the proof from the customer’s approach

Ask someone to read the name and contact method from where they would first see the truck. Save the loaded and unloaded views with the approved artwork.

For keeping lettering visible above steps, see the pickup side step wrap guide.

Request a project quote

Send the working setup photos and the service name and contact detail to display.

Discuss your project →