Davao Sticker Custom
Identify the factory graphics you intend to keep
Photograph both sides and the rider view. Label the existing graphics by panel and note which you want visible. If a graphic has been replaced or its condition differs on one side, include a close photo. Ask the installer to assess whether the original design is painted, under a finish, or an applied piece before approving work that depends on it.
Compare the finishes next to the actual artwork
Ask for the exact film samples and view them beside the factory graphics in shade and daylight. Look at the gloss and color from the same angle. If two wrapped panels meet an original graphic, ask for a mockup that shows how the three areas look together. Note whether a line breaks at the seat, fairing, or frame.
Set the boundaries and preparation on the same drawing
Ask where the film stops and which graphics remain exposed. If any existing piece needs removal or separate assessment, have the installer label it on the proof and quote it separately. Confirm which product and finish go on each panel.
Keep a reference for any graphics you intend to uncover later
Take a close photo and ask the installer how they would assess the area if you later change the wrap. Ask which original details are being left exposed and which will need separate preparation. Save those notes with the finish samples so you can return to the same decision.
Check the appearance with the bike assembled
Bring the approved sample and both side proofs to pickup. Look at the remaining graphics in similar light and save a photo of each transition.
For combining finishes across different panels, see the motorcycle wrap finish guide.