Skip to content
Cart
← The DSC Journal

Testing waterproof stickers on a folding drink carrier

Compare label positions on the open and folded carrier and check the sample through condensation, carrying, and storage.

Folding drink carrier labels
Davao Sticker Custom

Find the panel that stays clear when the carrier folds

Load the carrier with the cups or bottles it normally holds. Mark where the panels bend, where fingers grip, and where a cup sits against the side. Fold the empty carrier and see which edges meet. Put a mockup on a face that stays visible during pickup. Show the printer the material and how you fold the carrier between uses.

Run the printed sample through a typical delivery

Apply the recommended sample as directed. Load the drinks and carry them as staff normally would. Check where condensation collects and whether a cup rubs the sticker. Unload the carrier and wipe or dry it using the method suited to its material. Note any change in the print or edge before you fold it away.

Open it again and read the label before moving stock

Compare the sample after storage with a second piece placed away from a crease or wet contact point. Check whether the lettering still reads while the carrier holds a full order. If the sample lifts only at the fold, move the outline clear of that line and repeat the trial. Save the dimensions and a photo of the approved panel open and closed.

If the carrier is sometimes stored damp, leave the test sample for the usual storage interval. Open it and look at the faces that touched while folded. Check whether a label edge stuck to the opposite panel. Compare that result with the same carrier dried before folding.

See the waterproof sticker testing guide for a related check.

Request a project quote

Send the carrier open and folded and show where the sticker needs to read.

Discuss your project →