Davao Sticker Custom
Identify the canopy surface and parts
Photograph the canopy mounted on the pickup from both sides and the rear. Mark the solid panels, glass, frame, and any vents or trim. Give the installer the canopy model and surface details if you have them. Ask which surfaces the proposed film suits and whether they need a closer inspection before preparing the print proof.
Open the canopy as you use it
Take another set of photos with any side hatch or rear door in its regular position. Show where the latches and struts sit, and where you put your hands when opening it. If you use a rack, straps, or equipment on the canopy, show how they affect the clear area. Keep the decal away from working parts and needed views.
Give the canopy a complete piece
Ask for a mockup that shows the canopy and the bed together with a gap between them. If the canopy comes off the truck, decide which message needs to remain on the pickup. Test the canopy graphic as a separate piece on the fitted surface, then check both sides for any change in trim or door width.
Save a proof that belongs to this canopy
Record the canopy model, side, and measurements from fixed edges. If you transfer it to a different pickup, repeat the mounted check before carrying the design onto another panel. If you use several canopy styles, identify which proofs share the same footprint and which need their own measurements. Ask the printer to include that model reference on the kit label.
If the design also uses the painted bed side, start with the pickup bed side layout guide.