Davao Sticker Custom
Check what the scale is supposed to mean
Ask the printer to label the artwork and proof with their intended scale and units. Find one measured distance on the real panel, such as the gap between two fixed edges, and identify it on the proof. Compare the supplied dimension with the output measurement the printer expects. Confirm which view or piece that reference belongs to. Label the reference in plain language.
Print a critical section at actual size
Ask for a crop that contains a small line of text, a cut edge, or a feature that must line up with the vehicle. Measure the crop’s reference marks before using it. If you print it yourself, check the output settings and measure a known length so automatic page fitting cannot pass unnoticed.
Match the sample to the real panel
Hold the sample on the parked vehicle and check where the type, trim, or edge falls. Have the installer verify the full finished size for any piece you cannot print on one sheet. If a reference dimension differs, stop and ask whether the issue is the template, scaling, or the panel measurement.
Approve the file and scale as one record
Write the finished dimensions and revision on the approval. If the printer resizes or splits the artwork after review, check the affected dimensions again before release. Ask the printer to confirm the reference dimension in the final production file rather than relying on an earlier export. Save the measured crop or its photo beside that approval so another person can repeat the same check after a change.
Use the vehicle artwork handoff guide to package the final approved files.