Davao Sticker Custom
Map the strip and the paint beside it
Photograph the panel straight on and from a corner. Show where the chrome strip begins, ends, and changes direction. Mark any part that moves or comes off for service. Give the designer a clear measurement above and below the strip. Ask the installer which surfaces the proposed film suits before considering a piece that uses the trim.
Compare two positions around the trim
Try one layout above the strip and another below it, using the same design size. Check the space between the text and trim at both ends. If the strip angles up toward a body line, compare the layout from the rear corner before following that angle. Keep important words in one clear painted area if the strip divides the panel.
Check the lettering under a reflection
Hold the proof beside the fitted strip while the vehicle is parked. Look from the usual approach and then move to where the trim reflects the sky or nearby lighting. If the reflection makes the text harder to read, compare a position with more space or a stronger approved contrast.
Approve the boundary and measurements
Mark where the decal will start and stop, and record its distance from the trim and a fixed panel edge. Keep the angled photo with the print proof. If the strip changes on another model year, ask the designer to compare the measured space on both vehicles before reusing the proof. Note which model the approved piece was made for. Check that the photo shows the retained trim.
Use the trim decal proof guide if you are also considering a piece directly on a trim part.