Skip to content
Cart
← The DSC Journal

Testing an opening arrow on a box seal

Check that the printed arrow points to the real opening and can be seen before the recipient pulls or cuts the seal.

Box seal opening arrows
Davao Sticker Custom

Show the action the arrow should point to

Pack and close a box, then identify whether the recipient should lift a flap, pull a tab, or break the seal. Draw the arrow beside the exact starting point on a paper mockup. If the box can be turned around in delivery, keep the arrow and opening cue close together. Ask someone to identify the opening before you show them the intended direction.

Try the arrow on the actual sealed box

Apply a printed sample across the seam where the seal will sit. Look at the closed box from the angle where a recipient sets it down. Check whether an overlap, fold, or shipping label hides the arrow. Give the box to a second person and observe where they pull. If they follow the arrow but reach the wrong flap, shift the mark toward the real opening or add a short verb.

Review what remains after the seal breaks

Open several samples and check where the artwork tears. Keep instructions people need later on a part of the box that stays readable. Save a closed sample and an opened sample with the approved artwork. If staff seal the box from a different side at the packing table, mark the front edge on the reference so they can apply the arrow in the right direction every time.

Give the second test box to someone with the shipping label already applied. Check whether the arrow still makes sense when they turn the box to read the address or find the opening.

See the tamper-evident sticker brief for a related check.

Request a project quote

Send the closed box and mark the edge where the recipient should start opening it.

Discuss your project →