Davao Sticker Custom
Decide which information belongs on the liner
Show the bin with a clean liner fitted the way staff use it. Mark the space that stays visible after they tuck or fold the top. If the sticker identifies the liner's current contents, it can travel with that liner. If it identifies the bin itself, put the ID on a surface that stays after a change. Give the printer the liner material if you know it and include a spare for testing.
Apply the sample at the normal step
Ask whether the proposed sticker suits the flexible surface. Apply a sample to the liner when staff would normally label it. If they label before fitting, install that sample and check what happens along a fold. If they label after fitting, watch whether a hand can support the liner while applying pressure. Mark where the print or edges distort. Try a smoother spot with the same sample material for comparison.
Check it during a liner change
Lift and remove the liner as staff usually do. Look for an edge that catches or a label that becomes hidden when they gather the liner. If the code must remain readable after removal, test that step before approving the placement. Save the sample with the liner type and application sequence.
For a label attached to the bin itself, see the storage bin sticker guide.