Davao Sticker Custom
Check whether the glass is suitable before sizing the name
Show the installer the rear window from inside and outside. Identify tint, heater lines, and any wiper. Ask them to verify the vehicle and film guidance and applicable requirements. If the application cannot be confirmed or the driver needs that sightline, ask for a proof on a suitable body panel instead.
Try two positions on the curved glass
With the vehicle parked, hold a full-size paper proof at the proposed position without operating any window equipment. Look at it straight on and from each rear corner. Check whether the name seems to bend or loses its last letters where the glass curves. Compare a shorter line or smaller footprint on a flatter section. If you compare two sizes, keep the type style and spacing the same for the first check. That helps you see which change comes from the footprint alone.
Ask someone to read the exact name
Use the usual customer approach and have a fresh reader say the wording without prompting. If they miss the same letters from one angle, mark that spot on the photo. Have the installer check the full footprint from the driver’s seat and keep the required view and window functions clear. Remove the mockup before driving.
Save the position and the approved name
Record the final width, height, and orientation. If you move the name to the body, save the revised proof instead of the earlier glass position. Give the installer the photos from both rear corners and ask them to confirm the fit before printing.
Use the rear window readability guide to check the glass layout and driver’s view.