Davao Sticker Custom
Photograph both walking approaches
Stand at safe points where people first recognize the shop. Take one photo uphill and one downhill, keeping the storefront, door, and ground in view. Mark where a railing, steps, or another shop might block the sign. If the doorway sits above or below the pavement, include a closer photo that shows the change in level.
Put the same design in both views
Ask for a mockup at the proposed position on each photo. Look at whether the name reads at both angles and whether a projecting part, awning, or edge of the building hides any letters. Compare a second location if one route loses the message. Keep the door and nearby landmarks visible so you can check where the visitor should turn.
Walk the route with someone who has not seen the design
Ask them to say where they first identify the shop and point to the entrance. If one approach is harder, record the exact spot and what they could see. Ask the sign maker to revise the mockup from that position. Give the installer the slope and access photos to review before final placement.
Check where the door appears from the harder approach
If people see the sign before they can see the doorway, ask for a version that shows how they find the entrance after reading it. Mark any small direction sign separately. Ask the installer to review the proposed placement and sightline from both sides of the slope before fabrication.
Confirm the chosen view and position
Save both approach photos and the approved dimensions. At installation, repeat the walk from each direction before signing off.
For choosing how far the sign needs to read, see the storefront letter size guide.