Davao Sticker Custom
Give the lid and base their own view
Close the filled box and mark how far the lid overlaps the base. Put a paper mockup on the intended face and view it from above and from the side. Decide which information a recipient should still see after lifting the lid. If the sticker is only a logo, check whether it stays level when the lid goes back on. If the box needs an identifier at packing, consider leaving that code on the base.
Try the seal and the decoration separately
If the sticker closes the box, place a sample across the join and open it. Observe whether the label tears, stays attached to one piece, or pulls on the wrap. If the sticker only decorates the lid, keep it clear of the opening line and test the box with any ribbon or sleeve in place. Compare the proof on a full box so the parts sit at their usual height.
Keep one finished box at the packing table
Mark where the sticker goes and which edge aligns with the front of the box. Ask staff to pack one sample from that reference and compare it with the approval. Save a photo of the closed box and the view after opening.
If customers can lift the lid from either end, test both openings. A seal that breaks cleanly in one direction may take more of the paper wrap in the other. Mark the intended opening point if the package needs one.
For a separate closure intended to show tampering, see the tamper-evident sticker brief.