Skip to content
Cart
← The DSC Journal

How to place stickers on scooter underseat panels

Check the panels below the scooter seat with the seat open and closed, then mark the usable sticker area by side.

Vehicle graphics
Davao Sticker Custom

Photograph the panels with the seat shut

Take a straight photo of both sides of the parked scooter. Identify the side panel below the seat and show any body seam, fastener, or trim strip. Ask the designer to trace the clear area on each side. If the panels use different shapes or one has an access point, measure them separately and label the photos from the rider’s seat.

Show the area when the seat opens

Open the seat while parked and take a photo of the seat edge, hinge area, and any latch or lock near the panel. Show where you place your hand to open it. If a grab rail, helmet hook, or luggage hides the proposed position during normal use, mark that area on the proof. Keep working parts and manufacturer labels clear.

Compare the paper proof from the usual approach

Hold a full-size paper version against the closed scooter and look from the side and rear corner. Note where the shape of the panel crowds an end of the design. Ask the installer to confirm the sticker material for the panel and discuss a smaller outline if the piece would cross a sharp curve or seam.

Approve each side and save the reference

Save the position from two fixed edges, the artwork revision, and the exact panel. If one side has a different size, ask the printer to label the pieces separately. If the scooter has an optional rail or accessory that changes the view, note it on the proof. Give the printer a separate file for units with that part.

Use the motorcycle panel template guide if the design continues onto other fitted pieces.

Request a project quote

Share photos of both underseat panels, including the seat edge, grab rail, and nearby trim.

Discuss your project →