Skip to content
Cart
← The DSC Journal

How to select a logo size for a car with short doors

Compare two logo sizes on the actual clear door width and choose one that reads without crowding the handle or panel gap.

Vehicle graphics
Davao Sticker Custom

Measure the door where the logo will sit

Take a square photo of the parked car and mark the clear width between the handle, trim, and edges. Take another measurement where the proposed logo would reach the top or bottom. Tell the designer whether another door will carry contact details. Ask for a proof with the complete logo inside the clear panel.

Compare two sizes without changing the mark

Use the same version and position for the first comparison. Hold paper proofs against the door and step back to the normal approach. Check whether the smaller logo remains recognizable and whether the larger one makes a handle or gap look too close. If neither works, try an approved compact version. If the logo has a wide emblem and a narrow name, look at where the outer edge ends. Ask a reader to recognize the full mark from the side instead of judging the proof at arm’s length.

Review both sides before ordering a pair

Take the same measurements on the opposite door. If its trim differs, show both proofs with the actual spacing. Ask the installer to confirm the film and available area before cutting. Compare the approved sizes from a corner as well as a side view.

Save the chosen size and measured position

Keep a photo of the approved layout and record the dimensions and side. Give the printer the chosen version with its exact finished size. Keep the larger trial separate so it cannot be mistaken for approved artwork. Label the photos by door and body style.

Use the small sedan lettering guide if the design also includes supporting copy.

Request a project quote

Share a full side photo, door measurements, and the approved logo options.

Discuss your project →