Skip to content
Cart
← The DSC Journal

Choosing a cut line for letter stickers

Choose whether letters peel together or separately, then check the cut shape and spacing on a full-size sample.

Sticker cut paths
Davao Sticker Custom

Decide what someone needs to peel

Show the printer the final word or phrase and where it will go. Say whether the letters should stay together as a single sticker or peel as separate pieces. A single outline around the word can keep the spacing fixed when someone applies it. Separate pieces give you more control over placement but require you to line up each letter. Ask how the finished design will come off its backing before choosing the cut path.

Look for areas that get narrow at print size

Print the proposed outlines on paper and look at the thinnest strokes, pointed ends, and enclosed spaces inside letters. Mark where you need a clear opening and where a surrounding border is acceptable. If a cut runs close to a tiny letter detail, ask to see an outline that leaves more room. Give the printer the finished dimensions so they can assess the details at the size you will use.

Apply a sample to check the whole word

Peel and apply the sample on the intended surface. Step back and check whether the spacing and baseline still look even. If the sample has one outer outline, check whether the border reads as part of the design. Mark any trouble spots on a photo and send it with the proof version.

Use the bleed and safe area guide when setting up a printed border around the lettering.

Request a project quote

Send the lettering and show us whether the design should apply as one piece or as separate letters.

Discuss your project →