Davao Sticker Custom
Show the shop what is still on the vehicle
Photograph each panel with old branding before you book removal. Take close-ups of cracked film, lifted edges, and areas with adhesive left from an earlier job. Tell the installer when the graphics went on if you know, and share the film name or old invoice if you have it. Include photos of spot repairs, repainting, rust, and peeling clear coat near the lettering. For a fleet, note which vehicles show the worst wear.
Allow for an inspection before the new artwork goes on
A shop can assess the film and paint in person and discuss a test area if the surface raises concerns. Film condition and the condition of the paint underneath affect how removal goes. Old graphics can leave adhesive or reveal a difference in the surrounding finish. Ask the installer to flag anything that needs attention when they uncover it. If the paint needs repair, confirm with the paint shop and installer when the repaired surface will be ready for vinyl.
Separate removal from the new installation when needed
Ask the shop to outline removal, adhesive cleanup, and fitting the new graphics as separate parts of the job. Find out when you can review the exposed panels. If a unit needs to return to service between appointments, agree on when the new lettering can go on and which vehicles you can spare at each stage.
Update the proof after the surface check
Review the layout once you know which panels are usable. If you need to move the artwork, ask for an updated proof showing the new position and the approved contact details before production.
For planning the replacement artwork, read the vehicle decals and wraps guide.
See the 3M graphic removal bulletin for the manufacturer’s guidance.