Skip to content
Cart
← The DSC Journal

Testing removable stickers on laminated event passes

Run a timed peel trial on the real pass and check how its laminate, holder, and printed information look after removal.

Laminated pass stickers
Davao Sticker Custom

Identify the part of the pass you will reuse

Pull a spare pass from the same production batch. Note which side has the laminate and whether the proposed sticker sits over a name, code, or other print that needs to stay visible. Put the pass in its holder and mark where a clip or sleeve touches it. Ask the pass maker or printer which material and removal method suit that surface. Keep an unused pass as a reference for checking any change after the trial.

Match the time and handling at the event

Apply a sample as directed and leave it in place for the expected time from issue to return. Have someone wear or handle the pass as attendees would. Check whether the holder catches the sticker or hides its temporary wording. If the pass needs scanning during the event, scan it with the sticker in place. Photograph the sample before removal so you have a record of its condition.

Inspect the pass before using it again

Follow the approved removal method and compare the pass with the untouched one under the same light. Look for residue, lifted laminate, or print that comes away. Put the pass back into the holder and read any code it will carry for the next event. Keep the successful sample and the timing with the order.

If passes change hands more than once during the event, repeat the holder and scan check after the busiest handoff. Record any peeling that happens before you intend to remove the sticker.

For tracking the reusable pass itself, see the returnable pass numbering guide.

Request a project quote

Send a laminated pass sample and tell us how long the temporary sticker should stay on it.

Discuss your project →