Davao Sticker Custom
Identify the case and what the marking should do
Send the case model or a photo of its label and show where it mounts on the vehicle. Tell the installer whether you want a business name, unit identifier, or a marking specified for another purpose. If an organization requires a particular marking, get its specification before you choose a sample. Ask the installer to check film compatibility with the case finish.
Mark the clear area with the case installed
Open and close the case while the vehicle is parked and show where the latch, hinge, and handles sit. Photograph the area where straps or other equipment pass. Set the mockup inside a section that stays visible with the case shut and leaves the working parts clear. Give each case its own proof if its shape or fittings differ.
Compare samples from the positions you use
Review labeled samples from the rear and the side in daylight. If you need a low-light comparison, use a private area with the vehicle parked and compare them under the same light. Have someone view the markings in person as well as in photos. Keep your existing lights and reflectors clear throughout the check.
Save a proof that can follow the case
Label the approved photo with the case model, graphic position, and sample ID. If the case will move to another vehicle, repeat the placement check in that position before ordering a set for the fleet. Keep a separate note for each side if the case sits behind different equipment on the left and right. Record the case mounting position on the approved image.
Use the reflective photo proof guide to record comparable day and night views.