Skip to content
Cart
← The DSC Journal

How to read motorcycle side lettering from a service counter

Use the parked motorcycle and actual counter viewpoint to test whether staff can read the side lettering during a handoff.

Vehicle graphics
Davao Sticker Custom

Choose the staff viewpoint and the main line

Ask the service team whether they need to read the bike ID, courier name, or contact line. Park the motorcycle in its usual handoff position and photograph it from the counter. Show the box, bag, or equipment that affects the view. Mark which side staff normally see before they leave the counter.

Compare lettering at the actual position

Hold an actual-size proof against a suitable fitted panel. Ask someone at the counter to read the whole line without seeing the reference. If a rail, door, or neighboring bike hides an end of the copy, compare another clear position using the same wording and size. Keep hardware and working areas clear. Try the staff position at the height they normally use, such as behind the counter or beside its opening. Keep the wording unchanged until you have compared the available locations.

Check another parked orientation if it occurs

If the motorcycle can approach from another direction, repeat the reading test with it parked that way. Ask whether both sides need a piece. Confirm the film and surface with the installer and remove all trial pieces before using the motorcycle.

Record the counter view with the artwork

Save the exact words, fitted dimensions, and a photo from the counter. Give staff a copy showing where to look. If another site uses a different counter or parking spot, repeat the parked check there and record which proof belongs to each setup. Ask the installer to mark the exact location on the approved side photo.

Use the courier box number guide if the line customers need is a phone number.

Request a project quote

Share the exact wording and a photo from the counter position.

Discuss your project →