Davao Sticker Custom
Confirm what the installer can put on that glass
Identify the exact window and tell the installer whether the tint is in the glass or comes from an applied film, if you know. Ask whether the proposed decal can go on the intended side without affecting the existing finish or the required view. If the installer cannot confirm the application, use an appropriate body-panel proof.
Compare the logo through the real tint
With the vehicle parked, hold a sample on the inside without attaching it and view it from outside. Compare it with the same artwork held outside or against a light background so you can see how the tint changes what you read. Check the thin parts of the logo, pale colors, and any small words.
Repeat the check with different light behind the glass
Look at the sample in open shade and daylight. Check the usual viewing angle, then move to one side where the glass catches a reflection. If the mark is hard to read, compare a simpler logo or a version the printer can make with a solid backing. Have the installer confirm the chosen material and position before ordering.
Save what both sides look like
Photograph the approved view from outside and verify the placement from inside. Remove the sample before driving and record the window, tint information, and artwork revision. If you compare more than one window, note which tint and lighting conditions apply to each photo. Give the printer the full artwork rather than a screen capture of the darkest view so they can check the original colors.
Use the inside glass reading direction guide to confirm how the artwork faces outward.