Davao Sticker Custom
Identify the rack part you want to mark
Photograph the rack from a safe position with it installed. Give the supplier its model or part number and label the crossbar, end cap, fairing, or other area you want to use. Include a close-up of its surface and any existing coating. Ask the rack maker or installer to confirm whether an adhesive graphic is suitable for that part.
Show the places your cargo uses
Photograph the usual mounts, straps, clamps, or cargo box. Mark where they contact the rack and where you reach to adjust it. Include any labels, locks, or markings that need to stay clear. If you move the hardware for different loads, show those positions as well so the proposed decal stays in an area you can keep visible.
Measure and check the view from the ground
Record the available width and height and show the measurement points on the photo. Ask for a proof from the side and one from the normal viewing position. If the sticker is meant to identify a vehicle or a rack, check that the words are visible when the usual load is fitted.
Request a separate line for the rack piece
Ask the quote to name the rack part, graphic size, and material. Keep the marked photo with the quote so the installer can identify the exact mounting surface. If the rack maker approves only certain areas, include that guidance in the request. Show which parts can come off for fitting and ask how the finished piece should be identified if you order another for a different rack.
Use the removable accessory graphics guide if the rack moves between vehicles.