Skip to content
Cart
← The DSC Journal

How to size a QR code for a printed sticker

Leave room around the code and test it at print size on the actual package before ordering QR code stickers.

Sticker printing
Davao Sticker Custom

Give the code its own space

Decide where customers will scan the sticker and how close they can hold a phone. Someone holding a box at a counter can move it toward the camera. A person scanning a sticker behind glass may need to stand farther away. Reserve the largest practical square and choose a flat part of the package so the whole code stays visible.

Keep the blank margin

A standard QR code needs a blank margin at least four modules wide on each side. A module is one of the small squares that makes up the code. Include that space in your measurement and keep trim lines, lettering, and artwork beyond it. Start with dark squares on an even light background. If the sticker goes on a dark jar or a patterned pouch, use a solid light area behind the code and its margin. DENSO WAVE's QR code spacing guide shows how to calculate the full square.

Scan a sticker at its finished size

Open the destination link on a phone before you send the artwork. Then check a printed sample on the package with a few phones, at the intended distance and under the lighting customers will see. Try scanning a glossy sample where light hits it. If you have to tilt the package or move much closer to get a scan, change the placement or enlarge the code and test it again.

Send the destination URL, the planned scan distance, the sticker dimensions, and a photo of the surface with your quote request. Our product label printing guide covers what else to measure on your packaging.

Request a project quote

Send your artwork, measurements, and project details to Davao Sticker Custom.

Discuss your project →