Davao Sticker Custom
Mark the panel the door slides in front of
Photograph the side of the parked van with the sliding door shut and from the same position with it fully open. If the door also has a regular intermediate position, take a third photo. Ask the designer to mark the part of the fixed panel that the open door hides. Keep that overlap visible as a guide on the proof.
Put the complete line outside that area
Try the phone number, web address, or service line on a clear part of the fixed panel that remains visible. A line can read well with the door shut and lose a few digits when the van is loading. Check each complete word or number. If the available area is narrow, try a shorter message or a different fixed panel.
Review the proof with the door in use
Hold a paper proof on the fixed panel while the vehicle is parked. Remove it before moving the door, then place it again to check the resulting view. Stand where customers usually approach. Ask a helper to read the line in each normal door position and mark where an overlap or a handle hides part of it.
Record the clear placement by side
Save the photos and the final proof together. Measure the approved placement from a fixed edge and repeat the overlap check for another van with a different door travel or body length. If the proof uses a second line on the moving door, label it separately so the printer can replace either piece.
Use the sliding door proof guide to review the graphics on the moving panel itself.