Davao Sticker Custom
Start with the current body rather than the old outline
Photograph both sides and rear of the parked van. Mark the shorter cargo section, seams, trim, and doors. Measure the usable width and height from fixed points. Show the designer which panel or feature changed so they can compare the old proof with the actual vehicle before scaling anything.
Give the important copy enough room
Ask for a proof that keeps the company name and the full contact line on clear surfaces. If the longer layout cannot fit, compare a compact approved mark and a separate contact line. Keep the proportions of the logo the same unless the brand owner approves another version. Mark where a stripe ends on the shorter body. If the old art included a long service list, have the owner identify which words are essential for this van. Show the main name and contact line together in the updated proof.
Check the position around the doors and rear corner
Hold paper proofs against the parked van and look from the normal approach. Remove them before opening any door. Check the rear corner separately and ask the installer to verify the surface and film boundary. If the rear panel differs as well, give it a separate measured proof rather than reusing the earlier layout.
Record which vehicles use the shortened layout
Save the revised dimensions, artwork, and fitted photos. Label the kit by body type so a long-body piece is not sent for the shorter van. Ask the printer to note which panels share the new artwork and which retain the earlier layout.
Use the body configuration proof guide if the roof also differs from the original template.