Skip to content
Cart
← The DSC Journal

Proofing an instruction sticker for a reusable pump bottle

Read the instructions with the pump assembled and test whether staff can see them during unlocking, refilling, and cleaning.

Pump bottle instruction labels
Davao Sticker Custom

Match each instruction to the step it supports

Write down what a user does before using or refilling the bottle. Show the direction the pump turns and which part comes off. Put the approved instructions on an actual-size mockup and mark the side the user sees during those steps. Keep the text away from threads and the area that gets covered when the pump cap is off. Check the mockup with the nozzle facing its normal direction.

Watch someone use the proof on the bottle

Ask someone unfamiliar with the bottle to unlock and refill it while you observe. Note whether they can read the next step while holding the pump. If they turn the bottle, move the text or separate a longer instruction onto another panel. Use the actual bottle size and fill level for the trial. If the instructions include an arrow, confirm that it matches the physical motion.

Test the label through a refill and wipe

Apply the printed sample using the material instructions. Refill the bottle and wipe it as users normally would. Check whether the directions remain legible and whether the label stays clear of drips from the nozzle. Save a finished bottle with the proof version.

If the pump turns freely after you close it, check the instructions with the nozzle facing more than one direction. Move any wording that disappears behind the nozzle and mark the new position on the proof before reprinting.

For instructions placed where a customer fills a bottle, see the refill station instruction guide.

Request a project quote

Send the assembled bottle and the approved steps users need to follow.

Discuss your project →