Skip to content
Cart
← The DSC Journal

How to proof a vehicle wrap around removable bike rack fittings

Review the wrap with a rack fitted and removed, and mark the painted areas and attachment points the installer should inspect.

Vehicle wraps
Davao Sticker Custom

Show the actual rack and how it fits

Photograph the vehicle with the rack in its normal position and with it removed, using the same angle where possible. Include the fitting area, any removable caps, and the closest bumper or roof sections. Share the rack model and whether staff or owners move it between vehicles. Ask the installer which areas need an in-person look.

Mark the edges a fitting can hide

On the photo, identify any painted area that becomes hidden when the rack is mounted. Show the space around a cap or attachment point that a technician needs to access. Ask for a wrap proof in both positions. If a stripe crosses the hidden area, check what the visible ends look like with the rack in place.

Ask which contact areas affect the work

Point out where the rack or its fittings normally meet the car. Have the wrap installer and rack owner review the relevant instructions and agree how those surfaces should be handled. Record who will remove or refit the equipment and which areas need to remain clear for the rack to work as intended.

Keep a photo of each approved position

At pickup, compare the visible artwork with the proof. Use the photo without the rack to confirm where the film stops around caps or fittings. Keep the two views with the job file so another person can tell which edge or gap was part of the approved layout.

A mockup for a rear rack can show the cap closed, the cap open, and the rack attached. Put all three views on the same sheet so the installer can mark the visible graphics and the area that needs to stay accessible.

For a focused paint film request near the loading area, see the luggage loading sill guide.

Request a project quote

Send photos of the rack fitted and removed, plus the vehicle and rack models.

Discuss your project →