Skip to content
Cart
← The DSC Journal

Proofing a sticker for a fold-over bag top

Close a filled bag with a trial sticker and check how fold depth, opening, and stacking affect the seal.

Fold-over bag stickers
Davao Sticker Custom

Measure the fold with the bag filled

Fill a bag to its normal level and fold the top the way staff close it. Measure the surface above and below the edge of the fold. Repeat the check on a fuller bag to see whether the fold gets shallower or lands in a different spot. If a sticker will bridge the fold, use a paper mockup to show how much of it sits on either face. Mark any seam that crosses the intended position.

Close and open a printed sample

Ask for a sample suited to the bag material. Apply it on a packed bag as directed and let it sit for the time the supplier recommends. Lift and move the bag, then check whether the folded edge pulls on the sticker. Ask someone to open it and note whether the sticker tears, stays on one side, or removes paper from the surface. Decide whether the seal or the bag needs to remain presentable after opening.

Give staff a fold and placement reference

Save one approved bag with the fold depth and sticker position marked. If you run more than one bag size, confirm the sample for each size and write the approved closure beside it. Stack several test bags and make sure the seal stays visible without catching on the next bag.

If the bag needs a separate product label, try opening it again with both pieces in place. Make sure the product name remains visible afterward.

For a closure meant to show evidence of opening, see the tamper-evident sticker brief.

Request a project quote

Send a filled bag photo and show us how the top folds and where the sticker will go.

Discuss your project →