Davao Sticker Custom
Measure the handle after folding
Put the handle on a bag or carton and fold it into the position a customer will see. Mark the fold, the opening for fingers, and any tab that tucks into the package. Measure a flat area that remains visible once the handle is upright. If several sizes use the same artwork, compare the narrowest handle with the one staff use most often. Send a photo with the handle standing and folded down.
Find where the logo stays visible while carrying
Print an actual-size mockup and attach it to the chosen spot. Load the bag as you normally would and carry it a short distance. Check whether your fingers cover the mark and whether the paper bends under the label. Try a shorter mark on a wider section if the first mockup crosses a crease. Look at the result when the bag sits on a counter with the handle down.
Give staff a fold and placement reference
Ask for a sample for the paper finish. Apply one before folding and another after assembly if both options fit the packing process. Compare their positions and edges after carrying. Keep an approved handle attached to its package and mark the stage when staff should apply the sticker. If a paper tab slides through a slot, test that motion once more with the sample in place.
If the handle joins the box with two separate tabs, mark which side faces the customer before attaching the sticker. Check that the same placement works when staff pick up the package from either side.
For logo sizing on the main bag panel, see the shopping bag logo guide.