Skip to content
Cart
← The DSC Journal

Proofing a custom sticker with a short hang-tag link

Check a short printed URL beside the tag fastener and test whether a shopper can read, type, and open it from the finished tag.

Hang-tag link proofs
Davao Sticker Custom

Choose the exact link before setting the type

Use a short link your team can maintain and check where it leads. Keep the printed text with the artwork approval so a proof reader can compare each character. Mark any slash, hyphen, or similar-looking letter that could be missed at small size. Decide whether a customer types the address or uses a separate scannable code. Give the two elements distinct places if you use both.

Read the link with the tag on the product

Print the proof at actual size and attach the tag as it will hang in the shop. Check whether the cord, hole, or product covers part of the address. Ask someone to read it and type it into a phone without seeing the source. Confirm the page opens to the intended information. Adjust the spacing or use another line if the link is hard to transcribe.

Check the next tag size and save the approved text

Repeat the test on the smallest tag that shares the design. If the destination changes before printing, confirm that the proof shows the current address. Save a mounted sample and the tested link with the artwork. Tell the person responsible for the destination which printed version goes into stock so they can keep it working through the sale.

If the link is meant for a customer to use later, test it on a tag after the sticker has been handled. Check that no edge catches when the customer turns the tag to read the address.

See the merchandise hang-tag sticker guide for a related check.

Request a project quote

Send the exact link and show where it should go on the hang tag.

Discuss your project →