Davao Sticker Custom
Identify the number and the door section
Get the approved number as plain text and confirm what it identifies. Take a square photo of the parked rear door and another from the usual approach. Mark where the panel turns toward a corner, and show handles, trim, lights, and other features. Measure the usable width on the surface rather than estimating it from the angled photo.
Compare two positions with the same digits
Ask for actual-size proofs using the same type and spacing. Hold one on the angled section and another on a clearer part of the door or nearby body. Ask someone to read the full number from each view. If they miss the last digits, move the whole line toward the flatter area before making the letters smaller. If the door is part of a pair, show both shut in the first proof. Keep the digits on one door so the split does not interrupt the number.
Check the door while it is in service
Remove the mockups and show the installer the normal open and closed positions. Decide whether the line needs to read when a door stays open. Keep hardware and required markings clear. If the other door needs a matching piece, check its shape and viewing angle separately and have someone compare the printed digits to the approved copy.
Record the number and the placement reference
Save the exact text, finished dimensions, and measurements from fixed edges. Keep the angled photo beside the straight view so the installer can reproduce the approved position. Date the placement photo before sending it to the printer.
Use the service van phone grouping guide if the business number is a contact line.