Davao Sticker Custom
Start with a photo you can draw on
Choose a full view of the area and close views where two materials meet. Use one line to show the painted surfaces you want covered. Use a second mark for trim that you want the installer to assess. Label uncertain surfaces by location, such as the insert below the left headlight. If a part appears painted but you cannot identify it, describe what you see and mark it for review.
Show where the pieces should stop
Mark each seam, edge, or opening that matters to you. If you want a piece to end at the trim joint, point to that line on the close photo. Ask the installer to mark the proposed stops and identify any surface that needs more assessment. Confirm which parts of the drawing need to stay clear or require separate work.
Translate the drawing into the estimate
Give each area a short label, then ask for the same label on the estimate. Check which areas are included, which are optional, and which need an in-person review. If a trim part can only be priced after inspection, leave that line pending instead of assuming it comes with the nearby panel.
Save the approved version
Keep one final marked drawing with the quote. At pickup, review the same labels and photograph the boundaries you wanted to confirm. If the estimate changes after inspection, revise the drawing and the affected line together. Keep the previous version so you can see exactly which area moved out of scope.
For comparing the scope between shops, see the PPF quote comparison guide.