Davao Sticker Custom
Watch a normal loading sequence
With the vehicle parked and the rack fitted as directed by its maker, ask someone to watch how you load a bike. Have them note where a pedal, tire, or handlebar passes close to the bumper, hatch, or another painted area. Photograph the rack in its loading position and the painted areas you want assessed. Note whether a second bike changes the loading path.
Distinguish loading contact from rack contact
Use one mark where the bike passes and another where the rack itself sits close to the vehicle. If the rack or a moving bike is contacting the car during transport, check the rack maker’s fitting instructions and get the fit reviewed. For the loading marks, ask the installer whether the affected surface is suitable for the film and show which areas you want priced.
Keep the film outline tied to the actual rack
Ask for a close drawing of each small piece and use a body line or trim edge to locate it. If you use a different rack or load a bike from the other side, show that setup too. Check the outline with the rack fitted before deciding which pieces to order.
Review the covered spots before the next trip
Take a photo of the finished pieces with the rack and hatch in their usual positions. Save it with the outline so you can revisit coverage if your setup changes. Keep any newly observed contact separate from the areas you agreed to film, and check the rack fit before updating the outline.
If you also carry bikes or gear through the hatch, see the luggage loading sill coverage guide.