Davao Sticker Custom
Describe the repair panel by panel
Write down which parts of the car the body shop worked on and the date each repair was finished. Mention blends into adjacent panels, touch-ups, clear coat repairs, and work on edges near trim. If you bought the car used and lack the records, label those areas as unknown. Send photos that show each full panel and close views of chips, peeling, or old film.
Get the paint shop’s instructions
Ask the body shop to identify the paint system and share the paint supplier’s guidance on when it can accept film. Bring that information to your PPF appointment so the installer can review it against the film instructions and the panel’s condition. If the shop repaired the bumper and blended the fender, confirm which dates and instructions apply to each of those surfaces.
Review preparation and removal with the installer
At the inspection, walk through the affected panels together. Ask the installer to show you any spot that needs cleaning, paint work, or a separate decision before applying the film. Discuss how previous paint repairs can affect a future film removal and ask how the installer would handle removal on that panel. Note the decision on the same diagram you use to agree on coverage.
Use a staged plan if one panel needs more time
Ask for a quote that separates panels ready for installation from panels awaiting paint work or further inspection. Mark any exposed panel you plan to return for and ask whether adding it later will change the location of any joins. Book that work once the body shop and installer have confirmed the panel is ready. Keep a copy of any written instructions for that return visit.
Reference for the general guidance above. 3M paint protection film technical FAQ
For an overview, read the paint protection film guide.