Davao Sticker Custom
Photograph both sides of each mirror
Take a wide photo that shows the mirror in its normal position. Then photograph the painted cap from the front, the outer tip, and underneath if you can see it from a safe position. Use the images to label the painted shell, the black base, and any indicator or camera opening. Include close-ups of chips and scratches so the installer can review the parts you want covered.
Mark where you want protection
Outline the painted area on each photo. Mark the face that points toward the road and the outer tip where the shape turns toward the glass. If the mirror has a two-tone housing, identify each surface separately. Ask the installer to confirm which surfaces suit the film and draw where each piece will stop relative to the shell joint and indicator.
Ask about the tip and moving parts
Review the proposed pattern from above and from beside the car. Ask whether the installer expects a join, a visible edge, or a section left clear near the tip. If the mirror folds, show its folded and open positions and ask how the film edge will sit near the moving joint. Ask the installer to confirm whether they need to remove any part of the housing to achieve the agreed coverage.
List both mirrors on the estimate
Ask for the left and right caps as named items, especially if they have different features or prior repairs. At pickup, compare the finished outlines with the drawing and ask the installer to point out each agreed edge. Save a close photo of each tip and any openings with the job record.
See the front-end PPF coverage guide.