Davao Sticker Custom
Photograph the car during the pickup walkaround
Ask the installer to show you the covered areas before you leave. Take a wide view that locates each piece on the vehicle, then move closer to show where the film ends. Include a fixed reference, such as the corner of a headlight or a door handle. For a line that is hard to see, move sideways and use the reflection across the paint to bring the edge into view.
Take two views of any spot you discuss
If you and the installer discuss a spot at pickup, take one photo that shows where it is on the panel and one that shows the detail. Tap to focus on the spot and check the photo before moving on. Keep the original photos and mark up a copy with an arrow if the area is difficult to find. Note what you observed and any follow-up date you agreed on.
Name the photos so you can find them
Use a folder named with the pickup date and the vehicle model. Name the images by side and panel, such as left fender wide and left fender wheel arch. Save the coverage drawing and job number in the same folder. If someone else needs to see a specific area, send the two matching views and point to the panel on the drawing.
Match the angle when you follow up
Return to the same angle and include the same reference point if you photograph a change later. Write down the date you first noticed the change and share the pickup and current photos together. The installer can use the location and timing to decide what to look at during a follow-up visit.
Keep the photo folder alongside the instructions from the PPF aftercare guide.