Davao Sticker Custom
Identify what makes the fender wider
Photograph the full front corner and take a straight side view. Mark whether the extension is part of the painted fender or a separate piece. Show the profile from the front and where it turns toward the wheel. Include any seam, flare, or textured area. Tell the installer if the wider shape came with the SUV or was fitted later.
Check the outline over the visible shoulder
Ask the installer to mark the painted face and how far the proposed film goes around the extended shape. Compare the line along the highest part of the fender with the line near the wheel opening. Look at the drawing from the position where you usually see the corner and ask whether a join would appear there.
Compare the shape with adjacent panels
Review where the extension meets the bumper, hood, and door. If the vehicle has film on a nearby panel, ask the installer to show the old line alongside the new one. Have the installer assess each side if the trim or shape differs. Record any fit detail they need to inspect before committing to the pattern.
Make the wider profile easy to compare
Ask for a front corner photo showing the original fender and the extended shape, if you have both. Use it to confirm that the installer is assessing the part that is on the SUV now.
Save the view that best shows the profile
At pickup, use the front corner view and the side view to check the agreed outline. Photograph any stop or join that would help someone identify the piece later.
For a separate add-on beside the opening, see the fender flare transition guide.