Davao Sticker Custom
Ask to review the sample outside
Book time when the car and sample can be seen together outdoors. Bring the product and finish named in the estimate into the discussion. Ask to see the installer’s proposed sample over a representative painted surface, then record what surface they used. If a finish exists in two product lines, ask the installer to label each one so you can refer to it without relying on the word gloss or satin alone.
Use both shade and open daylight
Look at the sample straight on in open shade, then from an angle where it catches a reflection. Check it again in brighter daylight if you can. Compare one sample at a time from the same position, including the distance where you usually see the car. Note any effect you care about, such as how much a nearby window frame shows in the reflection.
Agree on what the approval covers
Identify which panels get the finish and whether any areas use another product. If you want a second daylight check before confirming the full job, ask whether the installer can demonstrate the proposed finish on a representative piece. Record the sample label, the day you checked it, and the conditions you used.
Use the same reference at pickup
Keep the approved sample or its identifier with the quote. Ask to see the finished panel under similar light and compare the agreed areas before taking the vehicle. If the finished result raises a question, review it against that reference before choosing a different finish.
For a comparison beside an adjacent panel, see the guide to matching PPF finishes.